8
 Followers
40
 Likes

The one click consumers refresh

References
On our radar
After a publish you can get a warning that a consumer is outdated.
You then need to go to that espace, open it, refresh de references and publish it.
If you have more consumers then this goes for all of them.
If you change and publish the producer then you need to do it all over it again.
This can be very time consuming.

I propose to have the possibility to refresh en republish these consumer espace directly from the warning pane: a one click refresh for all consumers.
Created on 1 Mar 2016
Comments (30)
Besides it's proposed already I think.

- do you mean only open espaces or closed ones as well?
- The time consuming will not be less, since everything needs to be refreshed anyways.
- Outsystems needs to build in logic to make sure the refreshing is in the CORRECT order, otherwise you end up refreshing the espaces multiple times.
- There is also need to break out circulair references, which makes it even harder.
- what happens if the refreshing breaks the consuming espace, do they need to be opened, or just marked as invalid?
- if you happen to have them open, do they get the focus when they need to merge stuff manually?
 
So even a lazy coder like me like the idea, I fear the effort for outsystem is much higher than the actual value for the developer.


Should I merge the idea with this one?
https://www.outsystems.com/ideas/2994/open-outdated-incompatible-modules-after-1-click-publish

It will increase the number of likes and merge the comments..

Cheers

Merged this idea with 'Open outdated/incompatible modules after 1 click publish' (created on 10 May 2017 19:05:03 by mariap)

When we publish a module and some consumer modules get outdated/incompatible, the list of those modules is provided in Service Studio. It would be nice to be able to open that module by double clicking that line.



Merged from 'Open outdated/incompatible modules after 1 click publish' (idea created on 10 May 2017 19:05:03 by mariap), on 14 Jun 2018 11:29:35 by Vasco Pessanha

This indeed will be a nice one!



Merged from 'Open outdated/incompatible modules after 1 click publish' (idea created on 10 May 2017 19:05:03 by mariap), on 14 Jun 2018 11:29:35 by Vasco Pessanha

I would like to be able to double-click on one of the Outdated Consumers warnings and directly open that eSpace in Service Studio. 

Kind regards,

Remco Dekkinga




Merged from 'Open the Outdated Consumers / Producers from the 1-Click Publish panel' (idea created on 2017-06-13 07:22:31 by Remco Dekkinga), on 2017-10-07 11:57:37 by Justin James

Merged from 'Open outdated/incompatible modules after 1 click publish' (idea created on 10 May 2017 19:05:03 by mariap), on 14 Jun 2018 11:29:35 by Vasco Pessanha

I think this idea could be merged with this one - https://www.outsystems.com/ideas/Idea_View.aspx?IdeaId=2994



Merged from 'Open the Outdated Consumers / Producers from the 1-Click Publish panel' (idea created on 2017-06-13 07:22:31 by Remco Dekkinga), on 2017-10-07 11:57:37 by Justin James

Merged from 'Open outdated/incompatible modules after 1 click publish' (idea created on 10 May 2017 19:05:03 by mariap), on 14 Jun 2018 11:29:35 by Vasco Pessanha

Yup, I'd say it's a duplicate of your idea mariap.



Merged from 'Open the Outdated Consumers / Producers from the 1-Click Publish panel' (idea created on 2017-06-13 07:22:31 by Remco Dekkinga), on 2017-10-07 11:57:37 by Justin James

Merged from 'Open outdated/incompatible modules after 1 click publish' (idea created on 10 May 2017 19:05:03 by mariap), on 14 Jun 2018 11:29:35 by Vasco Pessanha

Whenever breaking changes are made (e.g. remove an attribute from an entity), all referencing modules will become incompatible. This information shows up in the 1-Click Publish window in Service Studio. The problem is, these messages are cluttered with a number of other messages (e.g. outdated consumers), and can not easily be isolated. This makes it not very easy to quickly open these modules to update their references. 

There is no way to sort the 1-Click Publish messages, to get all incompatible messages together. There is also no way to copy ALL messages (one can only copy a single message), to be able to paste the info into something like Excel to filter out the incompatible messages. And there is no way to open these incompatible modules directly from the list, one has to actually open the modules one by one.

Ideas:

  • Being able to sort the messages list to put all incompatible messages together.
  • Being able to copy all messages.
  • Right-Click on incompatible message, drop down menu shows option to open the named module.
  • Command button added to 1-Click Publish window (e.g. besides the "Close" button) to open all incompatible modules (same functionality as used with Find usages in all eSpaces, which offers you the possibility to open all these modules at once).


Merged from 'Easy access to incompatible modules' (idea created on 22 Sep 2017 08:23:07 by Peter vanMunster), on 18 Jun 2018 08:55:54 by Vasco Pessanha

Ideally, one should be able to just open all the consumers at once and fix whatever needs fixing.



Merged from 'Easy access to incompatible modules' (idea created on 22 Sep 2017 08:23:07 by Peter vanMunster), on 18 Jun 2018 08:55:54 by Vasco Pessanha
Merged this idea with 'Open the Outdated Consumers / Producers from the 1-Click Publish panel' (created on 2017-06-13 07:22:31 by Remco Dekkinga)

Merged from 'Open outdated/incompatible modules after 1 click publish' (idea created on 10 May 2017 19:05:03 by mariap), on 14 Jun 2018 11:29:35 by Vasco Pessanha

Directly open a module by clicking the module name in the warning message like this one:


I'm not sure if this idea has been already posted, but i didn't find it.



Merged from 'Open module from warning message' (idea created on 2018-02-02 12:26:51 by Mikael Serra), on 2018-02-02 13:27:54 by J.

Merged from 'Open outdated/incompatible modules after 1 click publish' (idea created on 10 May 2017 19:05:03 by mariap), on 14 Jun 2018 11:29:35 by Vasco Pessanha

Directly open a module by clicking the module name in the warning message like this one:


I'm not sure if this idea has been already posted, but i didn't find it.



Merged from 'Open module from warning message' (idea created on 2018-02-02 12:26:51 by Mikael Serra), on 2018-02-02 13:27:52 by Vasco Pessanha

Merged from 'Open outdated/incompatible modules after 1 click publish' (idea created on 10 May 2017 19:05:03 by mariap), on 14 Jun 2018 11:29:35 by Vasco Pessanha

GREAT IDEA !!!!!



Merged from 'Open module from warning message' (idea created on 2018-02-02 12:26:51 by Mikael Serra), on 2018-02-02 13:27:52 by Vasco Pessanha

Merged from 'Open outdated/incompatible modules after 1 click publish' (idea created on 10 May 2017 19:05:03 by mariap), on 14 Jun 2018 11:29:35 by Vasco Pessanha

GREAT IDEA !!!!!



Merged from 'Open module from warning message' (idea created on 2018-02-02 12:26:51 by Mikael Serra), on 2018-02-02 13:27:54 by J.

Merged from 'Open outdated/incompatible modules after 1 click publish' (idea created on 10 May 2017 19:05:03 by mariap), on 14 Jun 2018 11:29:35 by Vasco Pessanha

Hi Mikael, nice idea!

It is very similar to this one (the only difference is having the trigger in True Change or 1CP pane):
https://www.outsystems.com/ideas/2994/open-outdated-incompatible-modules-after-1-click-publish


I'll merge them ;)



Merged from 'Open module from warning message' (idea created on 2018-02-02 12:26:51 by Mikael Serra), on 2018-02-02 13:27:54 by J.

Merged from 'Open outdated/incompatible modules after 1 click publish' (idea created on 10 May 2017 19:05:03 by mariap), on 14 Jun 2018 11:29:35 by Vasco Pessanha

Hi Mikael, nice idea!

It is very similar to this one (the only difference is having the trigger in True Change or 1CP pane):
https://www.outsystems.com/ideas/2994/open-outdated-incompatible-modules-after-1-click-publish


I'll merge them ;)



Merged from 'Open module from warning message' (idea created on 2018-02-02 12:26:51 by Mikael Serra), on 2018-02-02 13:27:52 by Vasco Pessanha

Merged from 'Open outdated/incompatible modules after 1 click publish' (idea created on 10 May 2017 19:05:03 by mariap), on 14 Jun 2018 11:29:35 by Vasco Pessanha

Changed the category to Service Studio




Merged from 'Easy access to incompatible modules' (idea created on 22 Sep 2017 08:23:07 by Peter vanMunster), on 18 Jun 2018 08:55:54 by Vasco Pessanha

Whenever you publish a module, some of the producer/consumer espaces become outdated/incompatible. It would be nice to have an option to open that espace with a right-click option



Merged from 'Ability to open 'outdated/incompatible' espace after a publish from TrueChange' (idea created on 29 May 2018 07:51:31 by Shahin Keshavari), on 14 Jun 2018 11:29:51 by Vasco Pessanha

Changed the category to References




Merged from 'Ability to open 'outdated/incompatible' espace after a publish from TrueChange' (idea created on 29 May 2018 07:51:31 by Shahin Keshavari), on 14 Jun 2018 11:29:51 by Vasco Pessanha

This is similar to quite a few other Ideas.

J.Ja



Merged from 'Ability to open 'outdated/incompatible' espace after a publish from TrueChange' (idea created on 29 May 2018 07:51:31 by Shahin Keshavari), on 14 Jun 2018 11:29:51 by Vasco Pessanha

You are right Justin, I must have scrolled over them. But still would love to see this feature



Merged from 'Ability to open 'outdated/incompatible' espace after a publish from TrueChange' (idea created on 29 May 2018 07:51:31 by Shahin Keshavari), on 14 Jun 2018 11:29:51 by Vasco Pessanha

I agree that we should be able to click on them to be able to open them


I don't see the extra value on being able to copy or sort them, but not against it as well :D




Merged from 'Easy access to incompatible modules' (idea created on 22 Sep 2017 08:23:07 by Peter vanMunster), on 18 Jun 2018 08:55:54 by Vasco Pessanha

Every time i publish an eSpace, after step 3 of Deploying it might show some warnings messages saying that the eSpace X Y or Z is outdated (see attachment).


 It would be great if we can right click on each message and open that eSpace directly.



Merged from 'Open eSpace directly on Outdaded Warnings of Deployment Step' (idea created on 20 Jun 2018 11:01:39 by Pedro Domingues), on 21 Jun 2018 10:46:53 by Vasco Pessanha

Changed the category to Service Studio




Merged from 'Open eSpace directly on Outdaded Warnings of Deployment Step' (idea created on 20 Jun 2018 11:01:39 by Pedro Domingues), on 21 Jun 2018 10:46:53 by Vasco Pessanha

After publish a module in Service Studio, when we get a "Incompatible" warnings a good idea would be the possibility to have a option to open the Consumers directly.



Merged from 'Service Studio - Incompatible Consumers' (idea created on 25 Jun 2018 10:27:55 by Fabrice Rosa), on 25 Jun 2018 10:35:20 by Vasco Pessanha
Merged this idea with 'Ability to open 'outdated/incompatible' espace after a publish from TrueChange' (created on 29 May 2018 07:51:31 by Shahin Keshavari)
Merged this idea with 'Easy access to incompatible modules' (created on 22 Sep 2017 08:23:07 by Peter vanMunster)
Merged this idea with 'Open eSpace directly on Outdaded Warnings of Deployment Step' (created on 20 Jun 2018 11:01:39 by Pedro Domingues)
Merged this idea with 'Service Studio - Incompatible Consumers' (created on 25 Jun 2018 10:27:55 by Fabrice Rosa)
views
784
Followers
8