Hello,
I am using a multi select dropdown to create a multi select filter for a table but unsuccessfully.
https://personal-ppykdftb.outsystemscloud.com/TestApps/
I assign the selected value (from the dropdown) to an variable (this variable will be used to filter in the table aggregate) but it seems that there is some thing wrong with my code.
Hope some one can take a look on my oml file and give me some advice.
My final target is to be able to apply filter to the aggregate with multiple values selected from the dropdown.
Thank you very much.
Phuoc Luc
Hi Luc Nguyen ,Please Check the Above Reply, Forgot to tag you, so I am reposting the Solution oml and Working Link.Working Link,
You can use the Logic implemented in the attached oml and implement it the same way in the module in your Environment if you couldn't publish the attached one.
Thank you very much Varada Rajan
Hello Luc Nguyen,I have edited the oml and attached the same try publishing it.
Thank you Varada very much,
I have check your oml file and try to publish it. But it seems that there were something wrong.
There is nothing in my table:
Could you show me your result or send me your link.
Thank you so much for your great support.
Hi,Try publishing this oml, also please remember to mark the post as solution if you find the way out to achieve your task
Hello Varada,
Thank you very much. But It seems that the function still did not work when I publish.
https://personal-ppykdftb.outsystemscloud.com/TestApps/MultiSelectFilter?_ts=637829283276042058
Could you send me the link or some image when you published it.
Thank you
Luc
Hi,here is the Working Link Working Link.You can use the Logic implemented in the attached oml and implement it the same way in the module in your Environment if you couldn't publish the attached one.Regards,Varada Rajan